LBI-38421A
11
Using the Radio (Two (2) Channel)
To Receive a Message:
1. Confirm the radio is turned on (channel indicator
lit). If not, press Power switch.
2. Select the desired channel by pressing either the
1 or 2 switch.
3. Press and hold MONITOR switch and then
adjust VOLUME controls for the desired
listening level. Release MONITOR switch.
4. Radio is now ready to receive a message.
To Transmit A Message:
1. Confirm that the radio is turned on (channel
indicator lit). If not, press POWER switch.
2. Select the desired channel by pressing either the
1 or 2 switch.
3. Press and hold MONITOR switch and then
adjust VOLUME controls for the desired
listening level. Release MONITOR switch.
4. Decide what you want to say. If you intend a
lengthy message (or several messages) the
vehicle engine should be running to maintain the
battery charge.
5. Observe the BUSY indicator and press the
MONITOR switch to assure that the channel is
not in use.
6. Remove microphone from hookswitch, press the
PTT switch and identify yourself. The XMIT in-
indicator will light each time the PTT switch is
pressed.
7. Release the PTT switch and wait for an answer to
your call. Then, complete your message.
NOTE
Always speak in a normal voice. Hold
the microphone cupped in your hand
and touching your cheek lightly. Speak
across the face of the microphone, not
directly into it. Shouting will actually
reduce the radio range, so do not
speak any louder than normal.
USING THE EIGHT (8) OR SIXTEEN (16)
CHANNEL
RADIO (WITHOUT SCAN)
To Receive a Message:
1. Confirm the radio is turned on (channel indicator
lit). If not, press POWER switch.
2. Select the desired channel by pressing either the ADD
or DELETE switch.
3. Press and hold MONITOR switch and then adjust the
VOLUME controls for the desired listening level.
Release MONITOR switch.
4. Radio is now ready to receive a message.
To Transmit A Message:
1. Confirm the radio is turned on (channel indicator lit).
If not, press POWER switch.
2. Select the desired channel by pressing either the ADD
or DELETE switch.
3. Press and hold MONITOR switch and then adjust the
VOLUME control for the desired listening level.
Release MONITOR switch.
4. Decide what you want to say. If you intend a lengthy
message (or several messages) the vehicle engine
should be running to maintain the battery charge.
5. Observe the BUSY indicator and press the
MONITOR switch to assure that the channel is not in
use.
6. Remove the microphone from the hookswitch, press
the PTT switch and identify yourself. The XMIT
indicator will light each time the PTT switch is
pressed.
7. Release the PTT switch and wait for an answer to
your call. Then, complete your message.
SCAN OPERATION
The SCAN function allows monitoring of up to eight or
sixteen receive channels (depending upon which control
module is being used). The scanned channels may be any
frequency within the frequency band limits of the radio and
may be Channel Guard protected. The radio message will then
be received only if the correct Channel Guard signal is present.
Any channel may be scanned with or without priority
level. One channel may be programmed for Priority 1 (P1)
and another for Priority 2 (P2) with any or all remaining
programmed channels being scanned as non-priority (S).
Receive Scan Rate
The scan rate for the radio will vary depending upon the
number of channels programmed into the scan memory and
whether or not Channel Guard is programmed. For a sixteen
channel radio the scan rate will vary from 1.1 to 4.4 seconds
for non-priority channel and 0.3 to 1.2 seconds for Priority 1
and 2 channels. The scan rate will be faster when fewer
channels are programmed into scan memory.
(30 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern